This output receiver is suitable for remotely receiving messages from a UHF transmitter. With 2 addresses, this remote control module is suitable for switching two different relays. Three types of connections are possible as Open Collector (OC) and Serial. A dry contact is an on / off switch which recognizes a change in the status. Electronic devices can be switched on or off remotely via the output receiver. Al sent data can be logged and stored. This hardware is often used for applications such as remote switching and reading of levels of vessels, water levels, light installations, electric fencing, access control. Almost all electronically controlled equipment can be switched/activated via this output receiver.
Switching the relay
Automatically send a message from the machine to pagers, which can be done with the fault sensor. In the event of an error message or status change, a notification is immediately sent to the pager or a gate can be opened that can be used to switch other equipment on or off. Receiving wireless signals with filter functions: This receiver can receive, store and process all wirelessly controlled messages over a network connection. This allows the RX100 to be combined with a two-way paging system. The RX100 can send messages at capcode level.
Access control
Open wireless barriers or entrance gates at the touch of a button.
Measuring Levels
Control over SCADA applications such as measuring levels of water reservoirs, vessels, temperature, and more.
Notification from machine
A message can be automatically sent to a specific recipient via a dry contact solution. For example, a fault in a machine can automatically switch on lights from, for example, a walk path for evacuation applications/procedures.
RX100 TCP Output Receiver
This output receiver is suitable for remote receiving messages from a UHF transmitter. With 2 addresses, this remote control module is suitable for switching two different relays. Three types of connections are possible as Open Collector (OC) and Serial. A dry contact is an on / off switch which recognizes a change in the status. Electronic devices can be switched on or off remotely via the output receiver. This hardware is often used for applications such as remote switching and reading of levels of vessels, water levels, light installations, electric fencing, access control and more. Almost all electronically controlled equipment can be switched via this output receiver.
Frequency List CE | 430 - 470 MHz license free |
Protocol | Tone Only |
Modulation Scheme | FM (FSK) |
Output Power | 100mw |
Capacity | Up to 32 Devices |
Baud Rate | 1200 Bps |
Range | max. 400 meter |
Transmitter | L6,5 x B6,5 x H9,5cm |
Software
Some software is available for this output receiver. With the software data which is sent can be logged and stored. Ask for more info.
Please contact us with any questions or for support. Click here to go to our contact page.